NI National Instruments PCI-6024E Analog I/O Device

Description

Tested and fully functional National Instruments PCI-6024E Analog I/O device.  Additional specifications from NI:
The
PCI-6024E
is an efficient and reliable
Multifunction DAQ
in the affordable
E Series
from
National Instruments
. The
PCI-6024E
Multifunction DAQ
offers sixteen single-ended input channels or eight differential input channels, along with two voltage output channels. The user can select any channel with the help of the software interface. The instrument comes with a built-in analog to digital converter, which enables the device for successive approximation for various measurement requirements. The
NI PCI 6024E DAQ Card
offers a resolution of twelve bits and two counters of 24 bits.
The
National Instruments PCI 6024E
provides a sample rate for real-time measurements. This sample rate enables the user to complete quick and accurate analysis, with the value of 200 kS per second. The output rate is 10 kS/s.  This helps improve the efficiency of the measurement system in tough industrial environments. The instrument also incorporates an input coupling mechanism for DC terminals and has a valuable overvoltage protection feature for the user’s safety. This model does not come with a FIFO buffer. Other features of this
Multifunction DAQ
include a self-calibration feature, temperature drift protection circuitry, and an onboard temperature sensor.
The
PCI-6024E NI DAQ
utilizes the Real-Time System Integration (RTSI) bus to synchronize multiple measurement functions to one timing or trigger event. The user can route trigger and timing signals between multiple functions on a maximum of five DAQ instruments in a PCI system. The
PCI-6024E NI
also
incorporates a 68-pin male SCSI-II I/O connector. The
PCI 6024E Card
has +4.65 to +5.25 VDC at 1 A power available at the I/O connector.