NI 9210 Ni-9210 temperature input module thermocouple genuine

Description

Free eBay listing template designed by dewiso.com
NI 9207 Analog Input Module w/ Spring Ports
Used NI 9210 from a working cRiO
Specifications & Details
NI provides more than 100
C Series
modules for measurement, control, and communication applications.
C Series
modules can connect to any sensor or bus and allow for high-accuracy measurements that meet the demands of advanced data acquisition and control applications.
Measurement-specific signal conditioning that connects to an array of sensors and signals
Isolation options such as
bank-to-bank
,
channel-to-channel
, and
channel-to-earth
ground
-40 °C
to
70 °C
temperature range to meet a variety of application and environmental needs
Hot-swappable
The majority of
C Series
modules are supported in both CompactRIO and CompactDAQ platforms and you can move modules from one platform to the other with no modification.
Technical Specs:
Input Characteristics
Number of channels
4 thermocouple channels, 1 internal autozero channel, 1 internal cold-junction compensation channel
ADC resolution
24 bits
Type of ADC
Delta-Sigma
Sampling mode
Scanned
Voltage measurement range
±80 mV
Temperature measurement ranges
Works over temperature ranges defined by NIST (J, K, T, E, N, B, R, S thermocouple types)
Conversion time
70 ms
per channel;
420 ms
total for all channels including the autozero and cold-junction channels
Common-mode voltage range
Channel-to-COM
±1.5 V
COM-to-earth ground
NI-9210 with mini-TC
60 V RMS
NI-9210 with spring terminal
250 V RMS
Common-mode rejection ratio (
0 Hz
to
60 Hz
)
Channel-to-COM
95 dB
COM-to-earth ground
>170 dB
Input bandwidth (
-3 dB
)
15 Hz
Noise rejection (at
50 Hz
and
60 Hz
)
85 dB
minimum
Overvoltage protection
Between any input and COM
±30 V
Between any two inputs
±30 V
Differential input impedance
20 MΩ
Input current
50 nA
Input noise
1 μV RMS
Gain error (at
-40 °C
to
70 °C
)
0.06%
typical
0.1%
maximum
Offset error (with autozero channel on)
±15 μV
typical
±20 μV
maximum
Gain error from source impedance
Add
0.05 ppm
per Ω when source impedance
>50 Ω
Offset error from source impedance
Add
±0.05 μV
typical,
±0.07 μV
maximum per Ω when source impedance
>50 Ω
Cold-junction compensation sensor accuracy
NI-9210 with mini-TC
23 °C
,
±5 °C
0.35 °C
typical
-40 °C
to
70 °C
0.55 °C
typical
0.95 °C
maximum
NI-9210 with spring terminal
23 °C ± 5 °C
0.55 °C
typical
-40 °C
to
70 °C
0.75 °C
typical
1.5 °C
maximum
Contact us
We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase.
Payment
eBay Accepted Payments only.
Shipping
USPS
Disclaimer
Contact Us if any problems.
Argonaut Labs, 2022