5A CC/CV MPPT Solar Panel Controller Charging Module LED DC-DC Step-down NEW

Description

1.Double LED Display
Module Name: 5A buck constant voltage constant current MPPT
Module Properties: Non-isolated buck module (BUCK)
Input voltage: 6-36V
Output voltage:
1.25-32V continuously adjustable (the default output 5V)
MPPT voltage setting range: 6-36V
Output current range: 0.05-5A (The default output current is 3A)
Turn lights output range: 0.01-5A (default turn lamp current 0.3A) the current range will be a little difference because the parts parameter error.
Multifunction double display: input voltage, output voltage, output current, output power
Operating temperature: -40 to + 85 degree
Operating frequency: 180KHz
Conversion efficiency: up to 95% (efficiency, input & output voltage, current and pressure-related)
Short circuit protection: Yes
Over temperature protection: (automatically shut off the output after overtemperature)
Input reverse polarity protection: None, (if necessary, please add the string into the diode)
Output anti-anti-irrigation protection: no, the output must be connected to the battery plus blocking diode, otherwise it will burn the module!
Charging indicator: charging red, bright green when fully charged. Turn lamp is the output current detection.
Installation: 4 pcs 3mm screws
Connection: IN is the input, OUT is output
Module dimensions:60 x 31 x 22 mm(without meter)
Note:
Detection module, please do not direct connect the output of negative electrode and the input of negative electrode
Applications:
1, DIY a voltage Regulator, with constant current function, Short-circuit proof, can protect the load.
2, It can power supply for electronic devices.
3, For a variety of battery charge, can observe the state of charge.
4, charger for all kinds of batteries, with MPPT function, can enhance the charging current to double. With a constant current and prevents battery overcharge, effective protection of the battery.
5, it can support high-power LED.
6, As a car power supply , it can for your cell phone or digital products supply.
Package Included:1PCS * 5A MPPT Solar Panel Controller DC-DC Step-down CC/CV Charging Module LED Display
2.Single LED Display
1. Module Name: 5A buck constant voltage constant current MPPT
2. Module Properties: Non-isolated buck module (BUCK)
3. Input voltage: 6-36V
3. Output voltage:
1.25-32V continuously adjustable (the default output 5V)
MPPT voltage setting range: 6-36V
4. Output current range: 0.05-5A (The default output current is 3A)
5. Turn lights output range: 0.01-5A (default turn lamp current 0.3A) the current range will be a little difference because the parts parameter error.
6. Multifunction double display: input voltage, output voltage, output current
7. Operating temperature: -40 to + 85 degree
8. Operating frequency: 180KHz
9. Conversion efficiency: up to 95% (efficiency, input & output voltage, current and pressure-related)
10. Short circuit protection: Yes
11. Over temperature protection: (automatically shut off the output after overtemperature)
12. Input reverse polarity protection: None, (if necessary, please add the string into the diode)
13. Output anti-anti-irrigation protection: no, the output must be connected to the battery plus blocking diode, otherwise it will burn the module!
14. Charging indicator: charging red, bright green when fully charged. Turn lamp is the output current detection.
15. Installation: 4 pcs 3mm screws
16. Connection: IN is the input, OUT is output
17. Module dimensions:60 x 31 x 22 mm(without meter)
Note:
Detection module, please do not direct connect the output of negative electrode and the input of negative electrode
Applications:
1. DIY a voltage Regulator, with constant current function, Short-circuit proof, can protect the load.
2. It can power supply for electronic devices.
3. For a variety of battery charge, can observe the state of charge.
4. charger for all kinds of batteries, with MPPT function, can enhance the charging current to double. With a constant current and prevents battery overcharge, effective protection of the battery.
5. it can support high-power LED.
6. As a car power supply , it can for your cell phone or digital products supply.
Package included：1PCS x MPPT 5A Solar Controller DC-DC Step-down Module Digital CC/CV Battery Charging
3.Without Display
Module Name: 5A buck constant voltage constant current MPPT
Module Properties: Non-isolated buck module (BUCK)
Input voltage: 6-36V
Output voltage:
1.25-32V continuously adjustable (the default output 5V)
MPPT voltage setting range: 6-36V
Output current range: 0.05-5A (The default output current is 3A)
Turn lights output range: 0.01-5A (default turn lamp current 0.3A) the current range will be a little difference because the parts parameter error.
Display: none
Operating temperature: -40 ~ + 85 degree
Operating frequency: 180KHz
Conversion efficiency: up to 95% (efficiency, input & output voltage, current and pressure-related)
Short circuit protection: Yes
Over temperature protection: (automatically shut off the output after overtemperature)
Input reverse polarity protection: None, (if necessary, please add the string into the diode)
Output anti-anti-irrigation protection: no, the output must be connected to the battery plus blocking diode, otherwise it will burn the module!
Charging indicator: charging red, bright green when fully charged. Turn lamp is the output current detection.
Installation: 4 pcs 3mm screws
Connection: IN is the input, OUT is output
Module dimensions:60 x 31 x 22 mm(without meter)
Note: Detection module, please do not direct connect the output of negative electrode and the input of negative electrode.
Applications:
1, DIY a voltage Regulator, with constant current function, Short-circuit proof, can protect the load.
2, It can power supply for electronic devices.
3, For a variety of battery charge, can observe the state of charge.
4, charger for all kinds of batteries, with MPPT function, can enhance the charging current to double. With a constant current and prevents battery overcharge, effective protection of the battery.
5, it can support high-power LED.
6, As a car power supply , it can for your cell phone or digital products supply.
Package Included:1 x 5A MPPT Solar Panel Controller Voltage Step-down Module Constant Current
4.Red Mppt
1w-100W 9V-28V is suitable 9V 12V 18V 24V solar panels to the batteries, nickel-cadmium, nickel hydrogen, lithium batteries (battery) charging, wind turbines solar street lamps
Input and output terminals are made of high-end switching power supply for high-frequency low-impedance electrolytic capacitors (LOW ESR), ensure that the output ripple. Can effectively filter out the switching power supply glitches.
Module parameters :
The modular nature: a real MPPT solar maximum power point tracking, automatic intelligent charge management, low power consumption
Input voltage: DC 8-28V input DC voltage. (Prohibition AC input)
Output voltage: DC 5-26V stepless transmission For lower output voltage, please contact the owner.
6V battery can be charged either 12 or 8.4V, 12.6V, 16.8V lithium battery
7.2V, 10.8V, 14.4V lithium iron phosphate battery
2-4 string lithium batteries, lithium iron phosphate charge management board
Output Current: 2A / 5A maximum charging current in two: A version 5A B version of A 2A 5A default shipping version
Charge indicator: Yes. Fast charging red light long bright red and blue lights flash alternately charged. Full automatic stop.
MPPT function: a. MPPT maximum power point automatic tracking, to maximize the full use of solar charging
Low pressure: 1V (as is the step-down voltage regulator, the input voltage is at least higher than the output 1V)
Low power consumption: Yes! Ultra-low pressure designed to achieve low power consumption and high efficiency, professional adaptation of solar panels
Operating temperature: Industrial grade (-40 ℃ to + 85 ℃)
Load regulation: ± 1%
Voltage regulation: ± 0.5%
Conversion efficiency: Max: 93% Peak: 95% for different lighting conditions vary.
Charging: automatic intelligent three-stage charging mode. Self-tracking solar power charge current automatically adjust the size
No-load current: 3MA even weak morning sunlight can easily start automatically, eliminating manual switch.
nput reverse polarity protection: Yes. Exclusively designed ultra-low dropout prevention MOS transistor reverse polarity protection, input reverse is not working.
Output reflux protection: Yes. Effectively prevent nocturnal reflux battery electric charge sheet!
Connection: There Terminals
mppt voltage: adjustable, MPPT solar modules in different voltage is different, even mppt voltage can not tune mppt solar controller, can be called mppt it? MPPT control technology using charge sheet charging efficiency ratio control scheme in general or a DC-DC step-down power MCU + PWM lift about 30%. Make full use of solar energy, and low-power operation. Reduce power loss! MPPT function can effectively prevent the solar panels so that the charging voltage is the battery slow slow death.
Note: The first charge in advance regulate the output voltage and please closely monitor the battery voltage to prevent overcharging! Do not unprotected lithium batteries!
Debugging method:
Step 1: Connect the solar cell, do not take the bottle to be charged, if the output voltage in step 2. If there is no transfer of small output counterclockwise slowly until the output voltage MPPT.
Step 2: counterclockwise transfer of small output voltage until the red and blue lights flashing, then coarse output voltage to a full cut-off voltage
Step 3: Access dead battery, and at the output string ammeter to monitor the charging current, MPPT trimming potentiometer until the charging current maximum.
Step 4: Access is just full of batteries, if the blue light is clockwise turn up the output voltage until the red light. Then transfer a small output voltage slowly counterclockwise until just blue lights, and then use a multimeter to measure to determine the cut-off voltage is correct to avoid overcharge!
ransfer methods instead of using the power supply of solar energy:
Step 1: The power supply was adjusted Solar MPPT voltage (such as 18V)
Step 2: The power supply connected to the input terminal, do not take the battery to be charged, if the output voltage is adjusted clockwise until no large MPPT voltage output. Then slowly counterclockwise until the transfer of small MPPT just have the output voltage.
Step 3: anti-clockwise turn down the output voltage until the red and blue lights flashing, then coarse output voltage to a full cut-off voltage
Step 4: Access is just full of batteries, if the blue light is clockwise turn up the output voltage until the red light. Then transfer a small output voltage slowly counterclockwise until just blue lights, and then use a multimeter to measure to determine the cut-off voltage is correct to avoid overcharge!
Charge Management board features:
1. Solar cell maximum power point tracking, the output current is greater than the solar panel current, real ultra-efficient MPPT, support 8-28V, 100W solar energy within large current charging with a solar panel recommended that each module) multiple modules connected in parallel to expand the charging current
2. The output voltage can be adjusted, CC-CW automatic control (can support single or multi-lithium batteries or lithium iron phosphate or lead-acid batteries, high-power LED, etc.)
3. A complete battery charge management
4. PWM Switching Frequency: 300KHz
Measuring resistance, low dropout perfect protection against reverse, reverse does not work, put an end to reverse damage to the charge sheet
Package included：
1PCS Solar Panel Regulator 5A MPPT Controller Battery Charging 9V 12V 24V Auto Switch
5.MPPT Cable
Communication cable CC-USB-RS485-150U USB to PC RS485 for
EP Solar Tracer Viewstar VS Landstar LS series Solar Charge Controller
PC communication cable
Model:CC-USB-RS485-150U
For LS-B ,Tracer-B,VS-B Controller
Payment
Payment
Payable To
Note
PayPal
Paypal
All payments are due within 7 days of the close of auction. Failing to do so, non-paying bidders will be reported to eBay.
Shipping Policy
Delivery Time
We ship to worldwide, it usually takes 10-30 Business Days to delivery.
Shipping address
We ship to your PayPal address. Please, make sure to provide us with correct, precise, and detailed shipping Address.
Send Time
Items will be shipped within 1 to 3 business days upon payment received or cleared.
Note
If you don't receive items over 30 business days, please notify us via eBay message.
Return Policy
We appreciate your business and offer an instant 7 days return policy.(7 days after receive the item). The returned item has to be in its original condition. We are able to refund your money without shipping cost.
Contact us
For anything about product, price, shipping or order status, please contact us via eBay message.
We love positive feedback and 5 scores DSR. We will leave it for everyone that leaves it for us.